High Temperature Nano Coating

High Temperature Nano Coating

Ethylene cracking furnaces typically operate at temperatures above 1000℃. Radiant heat transfer is the primary method of heating the material in the furnace tubes.

Download

Video

Technical Advancements

This radiant heat consists of direct radiation from fuel combustion and radiation emitted by the lining after absorbing the thermal energy from fuel combustion. The furnace tubes can only absorb infrared radiation within a certain wavelength range based on their material properties.

01

Related Products

Product Promotion

To prevent seal wear and tear in IFR tanks, triple-lip seal technology can be utilized. This involves filling gaps between modules with a first sealant material to isolate any channels that dissipate medium. The second sealant material is then applied to encompass the modules and prevent the escape of the medium. Finally, stainless steel metal fasteners are installed on the upper section of the second sealant material for added security.

The compensation elastic seal adopts an elastic seal plate structure and utilizes the embedded sealing principle to create an airtight space between the floating deck and the tank wall, forming a static sealing structure that prevents gas-phase mass transfer between the upper and lower spaces of the IFR.

The foam seal stays 50mm deep in the liquid, zero liquid and vapor space.

Telescopic Capsule Sleeve

The telescopic capsule sleeves installed on waveguide tubes with side wall openings can keep the two spaces apart and block the liquid and vapor inside the sleeve while the deck operates.

Submit

*Name

*Company

*Position

*Phone

*E-Mail

* The download link will be sent to your email.

Send

Get in touch with an expert

Contact us

Room 2508, Building B，Guorui Plaza, BDA, Daxing District, 100176, Beijing, China
86（010）87700530
bdes@bdes.com.cn

Products Publications About Us Partners Contact Us Join Us